Perform a basic search of our site

Taylor Return System for Shaper Sander

Taylor Return System for Shaper/Sander

60" x 84" for Larger Shops

  • Returns material up to 60" wide and 84" long.
  • Minimum material size 1" x 6"
  • Two powered rollers feed material onto receiving conveyor.
  • Roller Spacing 3" center to center.
  • 36" Rollers on return conveyors can handle up to 60" wide material. All rollers powered and individually clutched for long belt life.
  • 7' Return (measured from tail end of shaper/sander) standard.
  • Return is 1 1/2" lower than receiving conveyor, allowing for over/under return.
  • Variable Speed AC drive matches conveyor feed rate to shaper sander feed rate.
  • Adjustable Height .
  • Return Conveyor is composed of modular sections.

36" x 60 " for Smaller Shops

  • Returns material up to 36" wide and 60" long.
  • Minimum material size 1" x 6"
  • Two powered rollers feed material onto receiving conveyor.
  • Roller Spacing 3" center to center.
  • 24" Rollers on return conveyors can handle up to 36" wide material. All rollers powered and individually clutched for long belt life.
  • 7' Return (measured from tail end of shaper/sander) standard.
  • Return is 1 1/2" lower than receiving conveyor, allowing for over/under return.
  • Variable Speed AC drive matches conveyor feed rate to shaper sander feed rate.
  • Adjustable Height
  • Return Conveyor is composed of modular sections.
Smaller S&S Return
Larger S&S Return
Quick Return on S&S
Quick Return on S&S 2