Perform a basic search of our site

Side Loading Automated Clamp Carrier

Side Loading Automated Clamp Carrier
  • Automated Operation
  • Designed For Long Material
  • Continuous Flow Operation
  • "Smart Clamp" Software
  • Available in Pneumatic and Hydraulic

The Side Loading Automated Clamp Carrier includes all the productivity and design features of our Automated Clamp Carrier. However, it is equipped with a side loading infeed table and application system. This industrial clamping design is especially effective when edge gluing or laminating long material. Productivity levels are higher than the standard Automated Clamp Carrier because panels are being laid up on the infeed table at the same time that the previous panel is being tightened and flattened. In addition, large panels are pushed out of the machine onto a table or conveyor. This eliminates heavy lifting.

Production
Production is based on cycle time and panel size. Assuming that each section is curing 1 panels 24"x 96" (60 cm x 244 cm) and assuming a cycle time of 60 seconds, production per shift equals:

One Panel:
=16 ft2 (1.49M2)

One Section:
=16 ft2 (1.49M2)

One Cycle:
=60 seconds
=60 cycles/hour
=480 cycles/shift

Production output:
=16 ft2 x 480 cycles or 7680 ft2/shift
=1.49 M2 x 480 cycles or 715 M2/shift